Ensuring Your Gates Fit
All new gates are made to order, to ensure we are able to manufacture your gates to fit, please follow the following instructions carefully:

- The size of the gate opening determines the actual size of the gate. The opening is the distance between exsisting or new build posts/pillars. The width of your gate opening should be measured at the top, middle and bottom of the opening. The measurement you provide should be the minimum of these values.
- The height you specify for your gate should exclude adequate clearance.
- If you select a gate with an arched or inverted Arc design, please specify the lowest height point in the special instructions field.
- If the gate is a single opening, you should specify the hinge placement (ie. left or right) viewed from the rear of the gate.
- For uneven or rising ground requiring a ground clearance of more than 30mm, Rising hinges are available (max. gradiant 12º).
- Ensure the ground and any existing structure to which the gate is to be installed, is sound and suitable for the application prior to ordering.
Please ensure the details you provide are as accurate as possible as your gates will be manufactured to the specifications you provide.
Should you have any questions, please don't hesitate to call us on 01952 293737.